Eagle IntelliMap 640c Spezifikationen

Pub. 988-0143-881 www.eaglesonar.comMapping GPS ReceiverInstallation and OperationInstructions

4NOTE:The above memory capacities refer only to the IntelliMap 640c's on-board memory. The amount of GPS data you can record and save forrecall l

94To set the Month: Press ↓ to MONTH|ENT. Use ↑ ↓ to select the monthand press ENT.To set the Day: Press ↓ → to DAY|ENT. Press ↑ ↓ to select the day a

95 Main Menu (left) with Software Information command selected.The Software Information screen is shown at right.1. Press MENU|MENU|↓ to SYSTEM S

96To set Alarm Sounds: Press ↓ to ALARM SOUNDS. With the option high-lighted, press ENT to check it (turn on) and uncheck it (turn off.) Afterthe opti

97 Main Menu (left). Trails Menu (center). Trail Options (right).Delete All TrailsFrom the Trails Menu, press → to DELETE ALL|ENT|← to YES|ENT.Upda

98 Update Rate setting (left) and Update Distance setting (right). Trail Name highlighted (left). Edit Trail menu (center). Trails menuwith Ne

99 Transparency set to 0 percent (left), 50 percent (center)and 100 percent (right).TransparencyUse the transparency menu to adjust the transparen

100Units of MeasureThis menu sets the speed, distance, depth, temperature and headingunits.To change the units:Press MENU|MENU|↓ to SYSTEM SETUP|ENT|E

101Section 6: SearchingNOTE:The background map loaded in your unit lets you to search for U.S.Interstate Highway exits and exit services, as well as s

102In search results, the distance and bearing to the selected item willbe calculated from the current position. In the case of a cursorsearch, the se

103is correct, then press ENT|ENT. B. Jump down to the lower selection listby pressing ENT, then press ↓ or ↑ to select a city name from the list,then

5The background map is suitable for many navigation chores, but formaximum accuracy and much more detail, you need our optional map-making software, M

104 Find Any Item Selected by Map CursorOn the Map Page, with a POI or map feature selected by the cursorpress WPT. To return to the previous page, pr

1052. First, select a highway name by pressing ENT, which calls up theFind By Name menu. There are two highway search options. First, youcan spell out

1064. In the Exit Information screen you have two choices. Press ENT tonavigate or "go to" the exit or press →|ENT to find the exit on the m

107Find Waypoint menu with Lodging POI category selected.2. To search by nearest POI select NEAREST and press ENT. The Find BYmenu will show a "c

108 A list of Find by Nearest (left) and Waypoint Information menu atright.4. When the POI's Waypoint Information screen is displayed, you ca

109to change the first letter, then press → to move the cursor to the nextletter and repeat until the name is correct, then press ENT|ENT. Or youcan j

110If you want to navigate to the found street at the cursor location, justpress MENU|ENT|EXIT.Find an IntersectionYou must enter one street in the Fi

111 Find Intersection command highlighted on the left and the Find FirstStreet command highlighted at right.6. To search for the intersection of t

112Find Waypoints1. Press WPT|↑ to MY WAYPOINTS|ENT.2. When searching for the nearest waypoint, press ENT. If searching forthe waypoint by name, high

113 Find By Name menu (left). Waypoint Information screen (center). Thecursor crosshairs are centered on the desired waypoint (right).A. To navigat

6Introduction to GPS and WAASWell, now you know the basics of how the unit does its work. You mightbe ready to jump ahead to Section 2, Installation &

114Notes

115Section 7: Supplemental MaterialDatums Used by This UnitWGS 1984DefaultAdindanMean for Ethiopia,SudanAdindanBurkina FasoAdindanCameroonAdindanEthio

116Chua AstroParaguayCorrego AlegreBrazilDabolaGuineaDjakarta (Batavia)Indonesia (Sumatra)DOS 1968New Georgia Islands(Gizo Island)Easter Island 1967Ea

117Naparima BWITrinidad & TobagoNorth American 1927Mean for Antigua,Barbados, Barbuda,Caicos Islands,Cuba, DominicanRepublic, GrandCayman, Jamaica

118Point 58SwedenSanto (DOS)1965 Espirito SantoIslandSao BrazAzores (Sao Miguel,Santa Maria Islands)Sapper Hill 1943East Falkland IslandSchwarzeckNamb

119FCC ComplianceThis device complies with Part 15 of the U.S. Federal Communi-cations Commission (FCC) Rules. Operation is subject to the fol-lowing

120Notes

121Notes

122Notes

123Notes

7The system requires signal reception from three satellites in order todetermine a position. This is called a 2D fix. It takes four satellites todeter

124Notes

125EAGLE DATABASES LICENSE AGREEMENTTHIS IS a LEGAL AGREEMENT BETWEEN THE END-USER WHO FIRSTPURCHASES THIS PRODUCT AS a CONSUMER ITEM FOR PERSONAL,FAM

126DATABASES LIMITED WARRANTY"We", "our", or "us" refers to Eagle Electronics, a division of LEI, the manufac-turer of t

127EAGLE ELECTRONICSFULL ONE-YEAR WARRANTY"We," "our," or "us" refers to EAGLE ELECTRONICS, a division of LEI, the manuf

128How to Obtain Service……in the USA:We back your investment in quality products with quick, expert serviceand genuine Eagle replacement parts. If you

Accessory Ordering Informationfor all countriesTo order Eagle accessories such as power cables or MMC cards,please contact:1) Your local marine dealer

Visit our web site:www.eaglesonar.comEagle Pub. 988-0143-881 Copyright © 2005All Rights ReservedPrinted in USA 121905 LEI-Eagle

8only a tool. Always have another method of navigation available, suchas a map or chart and a compass.Also remember that this unit will always show na

94. The wait message disappears and the IntelliMap 640c begins show-ing navigation information along the trail. Now, begin moving and fol-low your Int

10Notes

11Section 2:Installation & AccessoriesPreparationsYou can install the GPS system in some other order if you prefer, butwe recommend this installat

12You need to select an antenna installation location that has a clear, un-obstructed view of the sky. After the module is installed, route the cablet

13For example, if you have to extend the power cable to the battery orpower buss, attach one end of the fuse holder directly to the battery orpower bu

Copyright © 2005 LEI-Eagle.All rights reserved.No part of this manual may be copied, reproduced, republished,transmitted or distributed for any purpos

14Cable connections.NMEA Cable ConnectionsNMEA is a standard communications format for marine electronicequipment. For example, an autopilot can conne

15However, a communications cable is not available for the unit at this time.If you need to create a NMEA 0183 connection consult customer service.Ser

16Optional R-A-M mounting system.Bracket InstallationMount the IntelliMap 640c in any convenient location, provided there isclearance behind the unit

17Front view (left) and side view (right) showing dimensions of theIntelliMap 640c when mounted on gimbal bracket.After drilling the hole, pass the an

18 In-dash mounting template for the IntelliMap 640c, showingdimensions. NOTE: The figure above is not printed to scale. a scaledtemplate

19Installing batteries in a typical portal power pack.MMC or SD Card Memory Card InstallationYour IntelliMap 640c uses a MultiMedia Card to store info

20Memory card compartment with a 16 MB MMC card installed.To remove an MMC1. Open the card compartment door by unscrewing the thumb screw.The screw sh

21MapCreate™ 6 CD-ROM (left) and MMC card reader for USB ports onthe right.Now that you have your IntelliMap 640c installed, move on to Section3, Ba

22Notes

23Section 3:Basic GPS OperationsThis section addresses the unit's most basic GPS operations. The tuto-rials presented in Sec. 3 follow a chronolo

iTable of ContentsSection 1: Read Me First!... 1Capabilities and Specifications: IntelliMa

243. MENU – Press this key to show the menus and submenus, whichallow you to select a command or adjust a feature. This also accessessearch functions

25Main Menu.The Main Menu commands and their functions are:Screen command: changes the contrast or brightness of the displayscreen.Sounds command: ena

26PagesThe unit has three Page displays that represent the three major oper-ating modes. They are the Satellite Status Page, the Navigation Pageand Ma

27 Satellite Status Page. The first figure (left) indicates unit has not lockedon to any satellites and does not have a fix on its position. Th

28The Satellite Status Page has its own menu, which is used for settingvarious options. Options and setup are discussed in Sec. 5. To accessthe Satell

29Speed is the velocity you are making over the ground. If you prefer, youcan customize the Speed data box to display Closing Speed instead.Closing Sp

30steer left to return to the desired course. You can use the ZIN or ZOUTkeys to change the cross track error range.Travel Time is the time that it wi

31 Map Page opening screen (left). Map zoomed to 100 miles (center). Mapzoomed to 10 miles (right). Over Zoomed, listed at the top of the mapscree

32Background map vs. MapCreate map contentThe background map includes low-detail maps of the whole world (con-taining cities, major lakes, major river

33 When the map is zoomed out far enough, most POIs appear as squaredots (left). As you zoom in closer, the symbols become readable icons.In the 0.2

iiNavigate to a Point of Interest... 46Creating and Saving a Trail...

34Digital Data map page option.In pages that have two major windows you can toggle back and forthbetween the two windows by pressing PAGES|PAGES. This

35the window widths. Press an arrow key parallel to the centerline toswitch between horizontal and vertical layout.On the Map with Sonar page, you can

36Basic GPS Quick ReferenceStart outdoors, with a clear view of the open sky. As you practice, trynavigating to a location at least a few blocks away.

37Find Your Current PositionFinding your current position is as simple as turning the unit on. Un-der clear sky conditions, the unit automatically sea

38The selected wreck (the Empress) to the southeast is 40 miles away.Selecting Any Map Item with the Cursor1. Use the zoom keys and the arrow keys to

39After the unit has acquired a position:1. Press WPT|↓ to POI-RESTAURANTS.2. You could search the entire restaurant category, but in this examplewe w

405. The POI information screen appears. (This is how you can use thisunit as a business phone directory!) If you wanted to navigate there,you could p

41You can create a waypoint at the cursor position on the map, or at yourcurrent position while you are navigating. You can create a waypoint atany lo

42 Sequence for setting a waypoint. Step 1: while traveling, press WPT tocall up Find Waypoint screen (seen in St

433. Press → to LATITUDE|ENT. Enter the latitude by pressing ↑ or ↓ tochange the first character, then press → to the next character and re-peat unti

iiiWaypoint Position ... 66Selecting a Waypoint ...

44Set Man Overboard (MOB) WaypointOne of boating's most terrifying events is having a friend or familymember fall overboard. This unit has a man

45Navigate to Cursor Position on MapThe GO TO CURSOR command navigates to the current cursor position onthe map. It is a quick way to navigate to anyt

46 The 60-mile zoom figure (left) shows the red course line connecting thecurrent position to the destination. The Navigation Page (right) will a

47until the length reaches the maximum trail point setting (default is2,000, but the unit can record trails 9,999 points long). When the pointlimit is

48Tip:Another quick way to stop recording one trail and begin a new oneis to use the New Trail command. Press MENU|MENU|↓ to MYTRAILS|ENT|ENT.Caution:

49tween them is "navigating a trail" follows a trail forward (from start toend) while "backtracking" follows a trail in reverse (f

50 Navigate a trail menu sequence: Fig. 1, My Trails command. Fig. 2,Trails Menu. Fig. 3, Edit Trail Menu. Fig. 4

51 Navigate trail: Driver (left) is heading southeast straight toward trailpoint 3. Driver (right) has reached point 3 and has turned south

52NOTE:If you are already located at or near the end of your trail, the arri-val alarm will go off as soon as you hit Enter. Just press EXIT toclear t

53Insert the MMC into your unit. Press MENU|MENU|↓ to SYSTEMSETUP|ENT|↓ to TRANSFER MY DATA|ENT.2. The Transfer My Data menu includes a message which

ivScreen Contrast and Brightness ... 93Set Language ...

54 These figures show the menu sequence for loading a GPS Data Filefrom an MMC into the unit's memory.Cancel NavigationYou c

55Section 4:Advanced GPS OperationsFind Distance From Current Position To Another Location1. While on the Map Page press MENU|↓ to FIND DISTANCE|ENT.2

56IconsIcons are graphic symbols used to mark some location, personal point ofinterest or event. They can be placed on the map screen, saved and re-ca

57Delete an IconYou can delete all the icons at one time, you can delete all icons repre-sented by a particular symbol, or you can use the cursor to d

58course of travel connecting waypoint to waypoint. The course from onewaypoint to the next is a leg. Routes are composed of one or more legs.The legs

592. Press ↑ to NEW ROUTE, then press ENT. To add to an existing route,press ↓ or ↑ to route name|ENT. Edit Route menu (left). Edit Route Waypoint

60 Route creation sequence, continued: Fig. 4. Point (3) set at channel mouth.Fig. 5. Waypoint (4) set further south along the beach, at a recogniza

61Edit a Route Name1. From the NAVIGATION PAGE, press MENU|ENT or from the MAP PAGEpress MENU|MENU|↓ to ROUTE PLANNING|ENT.2. Press ↓ to route name|

62Navigate a Route1. From the NAVIGATION PAGE, press MENU|ENT or from the MAP PAGE,press MENU|MENU|↓ to ROUTE PLANNING|ENT. Route Planning command

63 Edit Route screen showing Route 1 with waypoints set to normalnavigation (left). Reverse command has been executed (center) revers-ing the orde

1Section 1: Read Me First!How this manual can get you out on the road, fast!Welcome to the exciting world of digital GPS! We know you're anxioust

64 Trail selected with map cursor (left). The box at the bottom of thescreen shows distance and bearing from current position to the se-lected poi

65UtilitiesUtilities are useful tools for traveling or for outdoor activities.Alarm ClockTo get to the alarm clock menu press MENU|MENU|↓ to TIMERS|EN

66highlighted in the list, press ENT|ENT to access waypoint informationscreen.2. Use ↓ to select EDIT WAYPOINT, then press ENT|ENT. Press ↑ or ↓

674. The Edit Waypoint menu appears. Press EXIT repeatedly to get backto the main page display.Set a Waypoint by Projecting a PositionThis feature cre

68Notes

69Section 5:System & GPS Setup OptionsAlarmsThis unit has three GPS alarms: Arrival Alarm, Off Course Alarm andAnchor Alarm — the only one of the

70repeat until you are satisfied with the distance setting. If you want toenable the other alarms, repeat steps 2 and 3.4. Press EXIT repeatedly to ge

71 Menus for changing Com Port settings.For connectors and wiring information for another device, see page 15.For assistance in configuring the unit

72• VLW transmits the distance traveled through water as meas-ured by the paddle wheel.• VHW transmits the water speed as measured by the paddlewhee

73The Military Grid Reference System (MGRS) uses two grid letteringschemes, which are referred to as standard and standard + 10 MGRSon this unit. Your

2After you've learned the basics (or if you already have some GPS expe-rience), you may want to try out some of the IntelliMap 640c's manyad

74To configure a map fix:To use this format, you need to follow these steps in order. Take a mapof the area and determine a reference latitude/longitu

75command SET AS ORIGIN selected. Press ENT and the unit returns to theConfigure Map Fix menu. Finally, press EXIT to close this menu. Nowpress ↑ to C

76GPS SimulatorThe GPS simulator simulates real world navigation. It is a great way topractice using your unit. You can set the starting location by e

77mate TRACK (shown in compass degrees) that will point you toward thestart of the trail/route.2. Set SPEED to zero. Select STEER WITH ARROWS command

78to the destination waypoint. As you travel toward the destination, theunit automatically zooms in — one zoom range at a time — keepingyour current p

79Fill Water With WhiteFrom the Map Page, press MENU|↓ to MAP DATA|ENT. Press ↓ to FILLWATER WITH WHITE. With the option highlighted, press ENT to

803. To return to the main page display, press EXIT|EXIT.A list of the datums used by this unit is in the back of this manual. GPS Setup Menu (left)

81Map OrientationBy default, this receiver shows the map with north always at the top ofthe screen. This is the way most maps and charts are printed o

82 Map Menu (left). Map Orientation menu withthe North Up selected (right).NOTE:In North Up and Course Up, the present position arrow appears inthe

83To view Chart Note information:1. Use the arrow keys to move the cursor over a Chart Note icon. Whenit's selected, a pop-up name box appears.2.

3Case size:... 5.4" H x 6.9" W x 3.4" D (13.8 x 17.6 x 8.6cm); sealed and waterproof; suitable forsaltwater use.M

84NauticPath chart showing Port Services icon selected by cursor. Whenfirst highlighted, the Pop-Up name box appears.Tidal Current InformationNauticPa

85 NauticPath chart showing Tidal Current Station icon selected by cur-sor (left). Icon animates automatically at .08-mile zoom range (right).Curren

86To select another date:1. Use ← → to highlight month, day or year, then press ENT.2. Use ↑ ↓ to select the desired month, day or year and press ENT

87Tide Information screen.The Tide Information screen displays daily tidal data for this station onthis date at the present time. The graph at the top

882. From the Map Page, press MENU|↓ to MAP DATA|ENT|↓ to MAPCHOICE|ENT. Select the Map Name, then press ENT|EXIT|EXIT. South Chesapeake Navionic

89Overlay Data, with "Navigation," "Trip Calculator"and "Time" categories expanded.To overlay information on your screen

90 From Overlay Data Shown (left) press ENT to see Data Viewer (center).Select a category and press ENT; then select information to float onscreen a

911. From one of the Map Pages, press MENU|↓ to OVERLAY DATA|ENT.2. You'll see a list of the overlay data currently displayed. Select theitem you

92Reset OptionsTo reset all features to their factory defaults:1. Press MENU|MENU|↓ to SYSTEM SETUP|ENT|↓ to RESET OPTIONS|ENT|←to YES|ENT.NOTE:Reset

93Screen Contrast and BrightnessTo access the Screen menu, press MENU|MENU|ENT.The CONTRAST slider bar is already selected. Press ← → to adjust thecon