Eagle E-DVR-104 Betriebsanweisung

Document 800-00919 – Rev F – 02/08User GuideHRSD4Four-Channel Digital Video Recorder

Figures10Figure 3-18 Device Menu Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Figure 3-19 Camer

Configuration100Loading Default Settings1. Highlight and select Load Default Setup from the Config menu. A screen appears that asks you if you really

ConfigurationDocument 800-00919 Rev F 10102/08Note Even after changing the DVR settings by loading saved settings, the time-related settings (Date/Tim

Configuration102

OperationDocument 800-00919 Rev F 10302/084OperationNote This chapter assumes your DVR has been installed and configured. If it has not, please see Ch

Operation104Turning On the PowerAfter installing the DVR (See Chapter 2, Installation), it is ready to record. Press POWER. The unit takes approximate

OperationDocument 800-00919 Rev F 10502/08Monitoring Event-Detected VideoThe DVR can be set to display the event-detected video in full-screen on the

Operation106Using Pan, Tilt, and Zoom During Live MonitoringThe DVR controls cameras with Pan, Tilt, and Zoom (PTZ) capabilities. To enter the PTZ mod

OperationDocument 800-00919 Rev F 10702/08Figure 4-3 PTZ Menu2. Set the feature you wish to control by selecting it from the menu. Refer to the camera

Operation108Applying a Preset Camera PositionAfter you have set the camera presets, you can go directly to desired views. 1. Press QUAD/SEQUENCE to lo

OperationDocument 800-00919 Rev F 10902/08RecordingRecording VideoAfter installing the DVR (see Chapter 2, Installation), you are ready to record. Unl

Figures11Figure 3-61 Clip Copy Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97Figure 3-62 Di

Operation110Recording AudioIf you set the DVR to record audio, it records audio when video is recording.Note The DVR does NOT record audio when the re

OperationDocument 800-00919 Rev F 11102/08Figure 4-6 Playback (Text-In) ScreenPlayback Arrow ButtonsTable 4-1 Playback Arrow ButtonsButton ActionsPres

Operation112Using Digital Zoom in Playback ModeYou can use Digital Zoom during playback to enlarge an area of the recorded image. 1. Press PTZ while i

OperationDocument 800-00919 Rev F 11302/08Searching Recorded VideoPress MENU in the playback mode to display the Search Menu.Figure 4-9 Search MenuDat

Operation114Figure 4-10 Date/Time Search Screen2. Move the cursor over the date and press . Adjust the numbers using the arrows. When you have set th

OperationDocument 800-00919 Rev F 11502/08Note The time bar is divided into one-hour segments. If a segment is highlighted, it means that some video w

Operation116Figure 4-13 Event Search (by Event) Screen2. Highlight the field beside Search by and press to toggle between Search by (Event) and Sear

OperationDocument 800-00919 Rev F 11702/08Searching with the Text-In Log screen1. Select Text-In Search... from the Search menu. The Text-In Log scree

Operation1182. Highlight the Case Sensitive field and press to toggle between On and Off. If the Case Sensitive field is turned On, the DVR distingu

USB Hard Disk Drive PreparationDocument 800-00919 Rev F 11902/08AUSB Hard Disk Drive PreparationPreparing the USB-IDE hard disk drive in Windows 2000N

Figures12

USB Hard Disk Drive Preparation120Preparing the USB-IDE hard disk drive in Windows 98Note Preparing a USB-IDE hard disk drive under Windows ME is almo

Text-In Query ExamplesDocument 800-00919 Rev F 12102/08BText-In Query ExamplesQuery Example I12 345612345678901234567890123456789012345678901234567890

Text-In Query Examples122Query Example II123456123456789012345678901234567890123456789012345678901234567890Item Unit price Qty amount=================

TroubleshootingDocument 800-00919 Rev F 12302/08CTroubleshootingProblem Possible SolutionNo Power • Check power cord connections• Confirm that there

Troubleshooting124

Connector PinoutsDocument 800-00919 Rev F 12502/08DConnector PinoutsFigure D-1 Input Connector PinoutFigure D-2 Output Connector PinoutAI (1 to 4) Ala

Connector Pinouts126

Map of ScreensDocument 800-00919 Rev F 12702/08EMap of Screens

Map of Screens128

SpecificationsDocument 800-00919 Rev F 12902/08FSpecificationsVideo SpecificationsSignal Format NTSC or PAL (auto detect)Video Input Composite: 4 loop

TablesDocument 800-00919 Rev F 1302/08TablesTable 3-1 DVR Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . .

Specifications130Specifications are subject to change without notice.ConnectorsVideo Input Composite: 4 BNC Video Loop Composite: 4 BNCMonitor Output

Document 800-00919 Rev F 13102/08IndexAAlarm outputscheduling 59titling 58Alarm-in event action (alarm out) setup 69Alarm-in event action (notify) set

132II/O connector pinouts 125initial setup 35LLAN (ADSL) setup 88LAN (DHCP) setup 87LAN (Manual) setup 85language, setting the 39Live monitoring 104ch

133setupalarm-in 52alarm-in actions 68alarm-in event action (record) 69alarm-out 58auto deletion 63date/time 41DVRNS 89initial 35modem 88motion detect

134

www.honeywellvideo.com+1.800.796.CCTV (North America only)[email protected]© 2007 Honeywell International Inc. All rights reserved. No part of

Tables14

Document 800-00919 Rev F 1502/08About This DocumentThis document introduces the HRSD Series Digital Video Recorder and describes how to install, confi

16About Cautions and WarningsCaution A caution advises users that failure to take or avoid a specified action could result in loss of data or damage t

Document 800-00919 Rev F 1702/08Do not place this equipment on an unstable cart, stand, or table. The equipment may fall, causing serious injury to a

1814. Damage Requiring ServiceUnplug this equipment from the wall outlet and refer servicing to qualified service personnel under the following condit

Document 800-00919 Rev F 1902/0822. Mechanical LoadingMounting of the equipment in the rack should be such that a hazardous condition is not caused by

20Typographical Conventions[you can delete the conventions that don’t apply to your document]This document uses the following typographical convention

IntroductionDocument 800-00919 Rev F 2102/081IntroductionFeaturesYour color digital video recorder (DVR) provides recording capabilities for four came

Introduction22Figure 1-1 Typical DVR installationTechnical OverviewIn addition to replacing both a time-lapse VCR and a multiplexer in a security inst

InstallationDocument 800-00919 Rev F 2302/082InstallationPackage ContentsThe package contains the following:• Digital Video Recorder•Power Cord• User

Installation24Connecting the Video SourceConnect the coaxial cables from the video sources to the BNC Video In connectors.Figure 2-2 Video Input Conne

InstallationDocument 800-00919 Rev F 2502/08Note The audio input is from an amplified source. The DVR does not have amplified audio output, so you wil

Installation26Figure 2-6 Video Out ConnectorsNote For SPOT monitor Output, set the CVBS/VGA selector switch to CVBS.Connecting the RGB MonitorA VGA po

InstallationDocument 800-00919 Rev F 2702/08Figure 2-8 Alarm Input Connector StripsAI 1 to 4 (Alarm In)You can use external devices to signal the DVR

Installation28Connecting to the Network PortThe DVR can be networked using the 10/100Mb Ethernet connector. Connect a Cat5 cable with an RJ-45 jack to

InstallationDocument 800-00919 Rev F 2902/08Figure 2-12 Factory Reset SwitchCaution When using the Factory Reset, you lose any setting you have made.

User Guide

Installation30See Chapter 4, Operation for how to archive video to an external USB-IDE hard disk drive, USB CD-RW drive, or USB flash drive. You also

ConfigurationDocument 800-00919 Rev F 3102/083ConfigurationNote Your DVR should be completely installed (see Chapter 2, Installation) before proceedin

Configuration32Note A separate ALARM button is not provided. Press any key on the front panel or remote control to reset alarm output, including the i

ConfigurationDocument 800-00919 Rev F 3302/08ZOOM/PTZ Button Press Zoom/PTZ to open the Pan/Tilt/Zoom screen, where you can control properly configure

Configuration34Connecting the Infrared Remote ControlFigure 3-2 Infrared Remote ControlIf the Unit ID for the DVR is set to 0, you can control that DV

ConfigurationDocument 800-00919 Rev F 3502/08Turning on the PowerConnecting the power cord to the DVR turns on the unit. The unit takes approximately

Configuration36Setting Up Your DVR Using the Quick Setup ScreenFigure 3-4 Quick Setup ScreenThe Quick Setup screen allows you to set up the most commo

ConfigurationDocument 800-00919 Rev F 3702/08Note Quick Setup mode is released automatically when the user changes the DVR settings remotely using the

Configuration38Changing the System InformationIn the System Information Change screen, you can:• name the site location• assign a unit ID number• sele

ConfigurationDocument 800-00919 Rev F 3902/08Figure 3-8 Virtual Keyboard2. Use the arrows on the front of the DVR to highlight the first character you

RevisionsIssue Date RevisionsRev A 11/07 New documentRev B 11/07 Minor text changesRev C 11/07 More text changes; deleted "DVR" from product

Configuration40Upgrading the SoftwareNote Only the system administrator can upgrade the software.The boxes beside the H/W Version and S/W Version fiel

ConfigurationDocument 800-00919 Rev F 4102/083. Select Start, and enter the Admin password to start the upgrade.The system restarts automatically afte

Configuration42Changing the Time1. Highlight the second field beside Date/Time in the Date/Time setup screen and press the button. The individual se

ConfigurationDocument 800-00919 Rev F 4302/084. Delete dates by highlighting the X beside the date and pressing .Note Holidays that do not fall on th

Configuration44The field beside Next Synchronization displays the time when the next synchronization is scheduled. 6. Highlight Now… and press if yo

ConfigurationDocument 800-00919 Rev F 4502/08Checking the System1. Highlight System Check in the Main menu and press . The System Check (Config.) scr

Configuration46Figure 3-14 System Check (Alarm Out / Notify) Screen2. Highlight the field under the Alarm Out heading and press . A drop-down menu di

ConfigurationDocument 800-00919 Rev F 4702/08Setting Up for Notification of Storage ProblemsThe DVR can be set to react to storage problems by:• activ

Configuration48Figure 3-16 S.M.A.R.T. Setup ScreenYour DVR shows the conditions of Hard Disk Drives if the installed IDE hard disk drives support the

ConfigurationDocument 800-00919 Rev F 4902/08Viewing Events Using the System Log ScreenThe System Log screen displays a record of various events logge

Document 800-00919 Rev F 502/08FCC Compliance StatementINFORMATION TO THE USER: This equipment has been tested and found to comply with the limits for

Configuration50Configuring Input DevicesYou can configure the video, audio, and remote control devices connected to the DVR.Figure 3-18 Device Menu Sc

ConfigurationDocument 800-00919 Rev F 5102/08Note When selecting Covert 1, the DVR displays the camera title and status icons on the covert video. Whe

Configuration522. Change the number by highlighting it and using the Up and Down arrow buttons to increase and decrease the number. The PTZ ID number

ConfigurationDocument 800-00919 Rev F 5302/08Figure 3-22 Motion Detector Setup ScreenTurning Motion Detection On or OffTo turn motion detection On or

Configuration54The Motion Detection Zone screen lays over the video for the selected camera. A bright box appears around groups of four cells. Use the

ConfigurationDocument 800-00919 Rev F 5502/08Note If networking is configured by the external modem, the text-in cannot be set up. Set the DVR for LAN

Configuration56Figure 3-25 Text-In (VP Filter) Setup ScreenFigure 3-26 Text-In (Generic Text) Setup ScreenFigure 3-27 Text-In (EPSON-POS) Setup Screen

ConfigurationDocument 800-00919 Rev F 5702/08Table 3-7 Text-In Setup Screen OptionsOption FunctionVirtual Port Highlight the field beside Virtual Port

Configuration58Setting Up the Alarm OutputThe Alarm Out setup screen allows you to establish a schedule for each alarm output from the DVR.Highlight A

ConfigurationDocument 800-00919 Rev F 5902/08Scheduling an Alarm OutputYou can schedule alarm output in 30-minute increments from 0:00 to 24:00. Also,

6WEEE ComplianceWEEE (Waste Electrical and Electronic Equipment)Correct Disposal of this Product (Applicable in the European Union and other European

Configuration60Figure 3-30 Audio Setup Screen2. Highlight the field beside Audio Recording and press to toggle between On and Off. When turned On, t

ConfigurationDocument 800-00919 Rev F 6102/08From the Main menu, select RS232 and press . The RS232 Setup screen appears. Figure 3-31 RS232 Setup Scr

Configuration62Your DVR offers a variety of flexible recording modes. You can set it to:• record all the time• record only events• continue recording

ConfigurationDocument 800-00919 Rev F 6302/08Note When the DVR is in the Panic Recording mode, it ignores the time-lapse or event recording settings a

Configuration642. Press to toggle between On and Off. When On, the DVR deletes video recorded earlier than user-defined period. 3. Highlight the sec

ConfigurationDocument 800-00919 Rev F 6502/08On the recording schedule, a blue rectangle indicates the DVR is set to record during those 30 minutes. W

Configuration66Setting the Speed for Time-Lapse RecordingHighlight the field under the Speed heading and press . A drop-down list of recording speeds

ConfigurationDocument 800-00919 Rev F 6702/08Note You should use this feature only if you enable Event recording during time-lapse recording. If you d

Configuration68Note When a camera is set to On, displays on each camera screen. However, the DVR records the video only when events are detected.Not

ConfigurationDocument 800-00919 Rev F 6902/08Note The following procedures are the same for both Mode 1 and Mode 2. Highlight Alarm-In Action in the E

ContentsDocument 800-00919 Rev F 702/08ContentsFigures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Configuration701. Highlight Alarm-In Event Action (Alarm Out) in the Event Action menu and press . The Alarm In Event Action (Alarm Out) setup screen

ConfigurationDocument 800-00919 Rev F 7102/082. Highlight the Sched field and press . A schedule screen appears. Set the schedule as described earlie

Configuration722. Highlight the Camera field and press . A camera selection screen appears. Select the number(s) of the camera(s) you would like to a

ConfigurationDocument 800-00919 Rev F 7302/08Figure 3-40 Motion Detector Event Action (Alarm Out) Setup Screen2. Highlight the Sched field and press

Configuration743. Highlight the Notify field and press to toggle between On and Off. When set to On, the DVR notifies the remote site when certain e

ConfigurationDocument 800-00919 Rev F 7502/08Figure 3-42 Text-In Event Action (Record) Setup Screen1. Highlight the Sched field and press . A schedul

Configuration76Figure 3-43 Text-In Event Action (Alarm Out) Setup Screen2. Highlight the Sched field and press . A schedule screen appears. Set the s

ConfigurationDocument 800-00919 Rev F 7702/082. Highlight the Notify field and press to toggle between On and Off. When Notify is On, the DVR notifi

Configuration781. Highlight the Sched field and press . A schedule screen appears. Set the schedule as described earlier see Scheduling an Alarm Outp

ConfigurationDocument 800-00919 Rev F 7902/083. Save your changes by highlighting OK and pressing . Select Cancel to exit the screen without saving t

Contents84 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103Turning

Configuration80Setting Up the OSD (On-Screen Display)Highlight OSD, Main Monitoring in the Main menu, and press to set up the on-screen display on t

ConfigurationDocument 800-00919 Rev F 8102/08Note When the camera is set to Covert 1, status icons are not displayed on the screen.5. Highlight the fi

Configuration82Figure 3-49 Main Monitoring Setup ScreenSetting Up the DVR Network ConnectionsIn the Network Setup screen you can set up the DVR for LA

ConfigurationDocument 800-00919 Rev F 8302/08Using the Network Setup Screen for Network ConnectionFigure 3-50 Network Setup ScreenSetting the Connecti

Configuration843. Enter the new password. You must confirm the new password before it is accepted.Changing a User Password1. Highlight the field besid

ConfigurationDocument 800-00919 Rev F 8502/08Changing the Image Quality for TransferYou can program the image quality for transferring images and vide

Configuration863. Highlight the field beside DNS Server and press to enter the IP address of the DNS server. If you set up the DNS Server, you can u

ConfigurationDocument 800-00919 Rev F 8702/08Caution When changing the port settings, you must change the port settings on a PC running RASplus as wel

Configuration88Figure 3-54 LAN (ADSL) Setup Screen2. Highlight the field beside ID and press . A virtual keyboard appears with which you can enter th

ConfigurationDocument 800-00919 Rev F 8902/08Figure 3-55 Modem Setup Screen1. Highlight the field beside Baud Rate and press . A list appears of baud

FiguresDocument 800-00919 Rev F 902/08FiguresFigure 1-1 Typical DVR installation . . . . . . . . . . . . . . . . . . . . . . .

Configuration90Figure 3-56 DVRNS Setup Screen1. Highlight the box beside Use DVR Name Service and press to toggle between On and Off. When On, the e

ConfigurationDocument 800-00919 Rev F 9102/085. Highlight the field beside DVR Name and press to give a name to the DVR you want to register on the

Configuration92Setting Up the Callback Center to Contact a ComputerFrom the Main menu, select Network, then highlight Callback Center and press . The

ConfigurationDocument 800-00919 Rev F 9302/08Note Authentication should be turned On and the ID and Password should be entered when using an SMTP serv

Configuration94Figure 3-58 Callback Center (Modem) Setup Screen1. Highlight the field beside Pager Number and enter the telephone number of the pager.

ConfigurationDocument 800-00919 Rev F 9502/08A User password is required for the following actions:• to enter playback• to control fast forward playba

Configuration96Note The Admin and User passwords can have up to eight digits using the camera buttons. The default Admin password is 4321.Caution Writ

ConfigurationDocument 800-00919 Rev F 9702/08Figure 3-60 Config ScreenTo learn about setting up the DVR using the Quick Setup screen, see Setting Up Y

Configuration98If you want to archive Text-In text, place a checkmark in the Text-In box.3. Define how much video to back up by either changing the st

ConfigurationDocument 800-00919 Rev F 9902/08Note You cannot end the archiving process during CD burning. Refer to the RASplus User's Manual for